The new CHECKLINE TI-CMX & TI-CMXDL measures both coating and wall thickness quickly and accurately - from only one side. In addition, when switched to Pulse-Echo mode, the TI-CMX & TI-CMXDL automatically measures an eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting - without removing the coating.
Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
Five user-selected operating modes are included:
Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is not included)
Coating Only: Measures coating thickness only.
Features
-
Auto probe recognition with Auto Zero or Manual Zero.
-
Wide variety of dual-element probes can be used for nearly any application.
-
Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42-50 db).
-
64 custom setups can be stored and retrieved for convenient use and labeled for easy identification.
-
Bar graph with user-set start end values providing highest resolution around the target thickness value.
-
Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
-
Display Hi/Lo Alarm Limits with audible and visual indicators.
-
Metal housing provides strong protection against harsh environments
-
Includes NIST-Traceable Calibration
-
CE Certified
-
2 Year Warranty
Special Features of TI-CMXDL
-
Built in memory with RS-232 output for transferring data to printer or PC
-
Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
-
Data files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column
-
Each "grid type" File can be set for up to 999 rows by 52 columns
-
Each "sequential" File can be set for up to 512 rows by 1 column
-
Each file can be set for "data only" or as "data plus B-scan Graphic". Memory capacity is over 225,000 data values or over 16,000 data values with B-scan.
High Speed Scan Mode & B-Scan Mode
-
Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off.
-
The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. The B-Scan view draws at a rate of seven seconds per screen from right to left.
Download Data Sheet
Accessories
TICC-MVX
Protective holder for ultrasonic gauges
NIST-Traceable Steel Test Block - 3 Sizes Available
Precision Machined and Finished, Includes NIST Report and Test Data.
Uncertified Steel Test Block for Ultrasonic Gauges
For convenient confirmation of thickness gauge calibration
The TI-CMX & TI-CMXDL is supplied as a complete kit with the gauge, probe, 4oz bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, operating manual, RS-232 cable and software- all in a foam-fitted carrying case.
