 |
 |
 |
|
The SPM ELS14 Electronic Stethoscope is a sensitive and easy to use
listening device for locating the source of mechanical noise. Bearing
condition, gear and pump noise and the operation of relays and solenoids
are just a few of the many sounds that may be identified, amplified,
and assessed. Low, middle, and high filters can be selected in order to
single out relevant frequencies. Headphones equipped with ear defenders
effectively shut out ambient noise.
The ELS14 comes with an internal micro SD card and recording capabilities, enabling sounds to be played back from the device and also store sound files for future evaluation.
 | The ELS14-KIT comes complete with:
- ELS14 Electronic Stethoscope with micro SD card
- ELT10 Probe Set (60 and 290mm)
- EAR12 Headphones
- CAS09 Carry Case
Listening to machine sounds in order to determine the probable source of
abnormal noise is one of the most widely used methods in maintenance
departments across all branches of industry.
|
Technical Specifications:
Frequency Range:
| 30 Hz to 20 kHz
| | Enclosure: | PC/ABS, IP55
| | Keypad: | Seated, snap action
| LED Indicators:
| Power On, Volume, Filter Mode, Recording, Low Battery
| Volume Control:
| Adjustable in 10 steps | Auto Power Off:
| 10 minutes after use | | Filters: | Low, Middle, High
| | Recording: | MaxL 10 Files, up to 7.5 minutes per file
| File Format:
| WAV
| | Memory: | micro SDHC card
| Output Connector:
| 3.5mm Stereo mini-plug for Headphones
| | Battery: | Two AA / R6 cells
| Battery Life:
| > 30 hours (continuous use)
| Ambient Temperature range:
| -10° to +60° C (14° to 140° F)
| | Dimensions: | 213 x 38 x 48mm (8.4 x 1.5 x 1.9")
| | Weight: | 295 g (10.4 oz)including batteries and 60mm probe
|
|
|
|
|
|
 |
|
 |
|