HMV E/A101 Series Hydraulic Nuts without Threads

• Accommodates high drive up forces with ease
• Mounting and dismounting bearings on tapered shafts or sleeves
• Oil is pumped into the nut and the piston is pushed out with a force which is sufficient for mounting and dismounting bearings - effortlessly, accurately and safely
• Supplied with a quick connection coupling to fit the SKF hydraulic pumps
• Covers shaft diameters from 50 mm to 1 000 mm (1.967 in to 37.410 in)
• Reduced time to mount bearings
• Accurate safe bearing adjustment

Mounting
1. HMV E nut for driving the bearing onto a tapered seating	2. HMV E nut screwed onto the shaft for driving in a withdrawal sleeve
3. HMV E nut for driving the bearing onto an adapter sleeve	4. HMV E nut and special stop nut for driving in a withdrawal sleeve
Dismounting
5. HMV E nut and stop ring in position to press an adapter sleeve free.	6. HMV E nut used to free a withdrawal sleeve

• O-rings : Nut designation followed by /233983 e.g. HMV 10/233983
• Ball plug : 233950
• Quick connection nipple : 729832 A

Technical Data:

• Mounting fluid : LHMF 300
• Recommended Pumps
  • HMV 10E - HMV 52E : 729124 / TMJL 100 / 728619 / TMJL 50
  • HMV 56E - HMV 92E : TMJL 100 / 728619 / TMJL 50
  • HMV 94E - HMV 190E : 728619 / TMJL 50
  • For Drive-Up Method use Pumps with SRB suffix - Includes Pressure Gauge
• Quick connection nipple : 729832 A (included)

Dimensions and Designation: