-
Powerful magnets allow fast and easy attachment
-
Facilitates simultaneous adjustment of tension and alignment
-
Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
|
:
Versatile tools for pulley and sprocket alignment
The SKF
TKBA 10 and TKBA 20 allow pulleys and sprockets to be aligned on the
side face. The unit magnetically attaches to the inside or outside face
of almost any belt pulley or chain sprocket and has no small parts or
targets that can get lost. A laser line is projected from the
transmitter unit to the reflector unit mounted on the opposite pulley. A
reference line on the reflector unit directly indicates the offset and
vertical angle misalignment. The reflected laser line shown on the
transmitter unit shows the horizontal angle misalignment of all three.
Features and benefits
-
Powerful magnets allow fast and easy attachment
-
Facilitates simultaneous adjustment of tension and alignment
-
Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
-
SKF TKBA 10 utilizes a red laser and can be used for distances up to 3 m (10 ft)
-
SKF TKBA 20 utilizes a highly visible green laser and can be used
for distances up to 6 m (20 ft). It can even be used outdoors in sunny
conditions
-
Sturdy aluminum housings help ensure assembly stability and accuracy during the alignment process
SKF TKBA 10
Utilises a red laser and can be used for distances up to 3 m (10 ft).
SKF TKBA 20
Utilises
a highly visible green laser and can be used for distances up to 6 m
(20 ft). It can even be used outdoors in sunny conditions.
 DOWNLOAD DATASHEET
DOWNLOAD USER MANUAL
Specifications :
 |
|
Designation
| TKBA 10
|
Type of laser
| Red laser diode |
Laser
| 1x Built-in class 2 laser, <1 mW, 635 nm
|
Laser line length
| 2 m at 2 m (6.6 ft at 6.6 ft)
|
Measurement accuracy angular
| Better than 0,02° at 2 m (6.6 ft)
|
Measurement accuracy offset
| Better than 0,5 mm (0.02 in.)
|
Measurement distance
| 50 mm to 3 000 mm (2 in. to 10 ft)
|
Control
| Laser on/off rocker switch
|
Housing material
| Aluminum, powder coat finish
|
Dimensions
|
|
Transmitter unit
| 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
|
Receiver unit
| 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.) |
Reflector dimensions
| 22 x 32 mm (0.9 x 1.3 in.)
|
Weight
|
|
| Transmitter unit | 450 g (1.0 lbs)
|
| Receiver unit | 430 g (0.9 lbs)
|
| Mounting | Magnetic, side mounted |
| V-guides | N/A |
| Battery | 2x AAA Alkaline type IEC LR03 |
| Operation time | 25 hours continuous operation |
| Carrying case dimensions | 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in.) |
| Total weight (incl. case | 1,4 kg (3.0 lbs) |
| Operating temperature | 0 to 40 °C (32 to 104 °F) |
| Storage temperature | –20 to +60 °C (–4 to +140 °F) |
| Relative humidity | 10 to 90% RH non-condensing |
| IP rating | IP 40 |
| Calibration certificate | Valid for two years |
Case contents
| 1x TKBA 10 transmitter unit
1x TKBA 10 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate
|
|
Designation
| TKBA 20
|
Type of laser
| Green laser diode |
Laser
| 1x Built-in class 2 laser, <1 mW, 532 nm
|
Laser line length
| 2 m at 2 m (6.6 ft at 6.6 ft)
|
Measurement accuracy angular
| Better than 0,02° at 2 m (6.6 ft)
|
Measurement accuracy offset
| Better than 0,5 mm (0.02 in.)
|
Measurement distance
| 50 mm to 6 000 mm (2 in. to 20 ft)
|
Control
| Laser on/off rocker switch
|
Housing material
| Aluminum, powder coat finish
|
Dimensions
|
|
Transmitter unit
| 169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
|
Receiver unit
| 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.) |
Reflector dimensions
| 22 x 32 mm (0.9 x 1.3 in.)
|
Weight
|
|
| Transmitter unit | 450 g (1.0 lbs)
|
| Receiver unit | 430 g (0.9 lbs)
|
| Mounting | Magnetic, side mounted |
| V-guides | N/A |
| Battery | 2x AAA Alkaline type IEC LR03 |
| Operation time | 8 hours continuous operation |
| Carrying case dimensions | 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in.) |
| Total weight (incl. case | 1,4 kg (3.0 lbs) |
| Operating temperature | 0 to 40 °C (32 to 104 °F) |
| Storage temperature | –20 to +60 °C (–4 to +140 °F) |
| Relative humidity | 10 to 90% RH non-condensing |
| IP rating | IP 40 |
| Calibration certificate | Valid for two years |
Case contents
| 1x TKBA 20 transmitter unit
1x TKBA 20 receiver unit
2x AAA batteries
1x Printed instructions for use
1x Calibration certificate
|
|
|