Designation
| TKBA 40
|
Type of laser
| Red laser diode |
Laser
| 1x Built-in class 2 laser, <1 mW, 632 nm
|
Laser line length
| 3 m at 2 m (9.8 ft at 6.6 ft)
|
Measurement accuracy angular
| Better than 0,2°
|
Measurement accuracy offset
| Better than 0,5 mm (0.02 in.)
|
Measurement distance
| 50 mm to 6 000 mm (2 in. to 20 ft)
|
Control
| Laser on/off switch
|
Housing material
| Extruded aluminium
|
Dimensions
|
|
Transmitter unit
| 70 x 74 x 61 mm (2.8 x 2.9 x 2.4 in.)
|
Receiver unit
| 96 x 74 x 61 mm (3.8 x 2.9 x 2.4 in.) |
Reflector dimensions
| N/A
|
Weight
|
|
| Transmitter unit | 320 g (0.7 lbs)
|
| Receiver unit | 320 g (0.7 lbs)
|
| Mounting | Magnetic, groove mounted
(optional side adapter TMEB A2) |
| V-guides | Size 1: 22 mm, short rods (3x pairs)
Size 2: 22 mm, long rods (3x pairs)
Size 3: 40 mm, short rods (3x pairs)
Size 4: 40 mm, long rods (3x pairs) |
| Battery | 2x AA Alkaline type IEC LR06 |
| Operation time | 20 hours continuous operation |
| Carrying case dimensions | 260 x 180 x 85 mm (10.2 x 7.1 x 3.3 in) |
| Total weight (incl. case | 1.3 kg (2.8 lbs) |
| Operating temperature | 0 to 40 °C (32 to 104 °F) |
| Storage temperature | –20 to +65 °C (–4 to +150 °F) |
| Relative humidity | 10 to 90% RH non-condensing |
| IP rating | IP 40 |
| Calibration certificate | Valid for two years |
Case contents
| 1x TKBA 40 transmitter unit
1x TKBA 40 receiver unit
2x AA batteries
4x sizes of V-guides, 3x of each size
1x Printed instructions for use
1x Calibration certificate
|
