 |
 |
 |
|
The SKF Belt
Frequency Meter is one of the most accurate tools available for
measuring the belt tension on a belt drive. Results are quickly
achieved, reliable and – most importantly – repeatable. The tool is also
extremely easy-to-use, while minimizing the risk for human errors.
Thus, the SKF Belt Frequency Meter is ideal for measuring the belt
tension.
Correct belt tension
is crucial for the whole belt drive, its service life and the service
life of associated bearings. Therefore, it is important to get accurate
and reliable results when it comes to belt tension measurement.
Easy and quick to use:
-
Simply key in the span length and mass data. Data can also be saved and recalled for repeated use, if necessary
-
Aim sensor at centre of selected belt span and pluck or tap the belt
-
The display will show the measured frequency which can be toggled to either newton or pounds values
-
Readjust the belt tension, if necessary and take another measurement
Wide range of applications
The two component
system, consisting of a hand-held meter attached to an optical sensor,
offers contact-free belt tension measurement for most of the following
belt types – even in a noisy environment:
-
V-Belts (wrapped, cogged raw edge, ribbed)
-
Banded V-Belts
-
Timing belts
The SKF Belt
Frequency Meter is capable of measuring belt vibration frequencies from
10 to 400 Hz. Based upon the measured belt frequency the SKF Belt
Frequency Meter calculates belt tensions up to 9 900 N (2 200 lbs.)
|
|
|
 |
|
 |
|