|
Portable, highly stable and accurate, industrial-quality tools for non-contact RPM measurement, inspection and observation of moving parts by "freezing" or "slowing down" the action. The DT-315 Digital Stroboscope may be powered directly by an AC Adapter or it's 12 V DC Internal battery.
|
Features: |
-
Highest accuracy and most stable flash rate
-
Easy-to-read LED display Easy-to-operate controls
-
Detachable pistol-grip handle
-
Tripod mountable via ¬"-20unc screw; 8mm or shorter
-
Provides 12 V DC power for external sensors
-
Accepts external trigger input and provides synchronizing pulse output
-
Phase shift for best view and flash photography
-
Flash rate control Instant double and half-rate flash selection for error-free reading |
|
|
Specifications
- Flash Range: 100-30,000 FPM
- Accuracy
- Drift: ñ0.01% per degree C
- Update Time
-
Output Signal:
-
Display & Rate: Divide or multiply by 2, selectable
-
Low Battery Indicator: Display shows L's
-
Operating Temperature: 32-104ø (0-40øC)
-
Display: 5 digits, 10 mm high, red LED
-
Flashtube: Xenon, 10 W maximum Flash Duration 10-30 æs
-
Sensor Power Supply: 12 VDC ñ 0.5V (50ma)
-
External Mode ONLY
-
Phase Shift: 0 - 359ø with 1ø resolution or 0 - 333 ms from 200 - 3,000 FPM
-
Input Signal Req'd for External Triggering:5-24 V P-P (not to exceed 35 V to GND) pulse width 50 æs minimum, rise time less than 0.2 ms
-
Input Impedance: 10,000 ohms
-
Power Requirements: Three (3) hour, external, rechareable 12 V DC Power Pack or external 12 V DC
-
Accessories Included: External battery pack, 12 V DC, with 115 V AC or 230 V AC Charger & carrying case
-
Battery Life (charged): 3 hour at high flash rate
-
Full Charge in: 16 hours
-
Dimensions: 4.7 x 4.7 x7.2" (120 x 120 x 183mm)
-
Weight:4.5 lbs. (2 kg)
|
|