 |
 |
 |
|
The DCF-900 measures the thickness of paint, plating, coatings and galvanizing on iron or steel... accurately, dependably and economically! The DCF-900 and include the gauge and probe, a bare test plate, two precision calibrations shims & instructions, all in a foam-fitted carrying case. Calibration to NIST standards is available upon request.
Features
Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.
Keypad-selectable English or metric units.
Continuous reading update detects soft coatings as probe tip "sinks" into them.
Remote probe permits easy access for difficult, hard-to-reach places.
Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job
Very reliable operation... Consistent, repeatable measurements
Excellent results with thin substrates... As thin as 0.005" (10 µm)
Specifications
Range: 0.1-40.0 mils (0-999 µm)
Resolution: 0.1 mil (1 µm)
Accuracy: 0-10 mils: ±0.1 mil 10-40 mils: ±1% of reading
Probe: Monopolar, magnetic induction, 0.4" (10 mm) dia., spring-loaded, with V-notched shell and 28" (70 cm) cable
Battery/Life: 9 V alkaline/approx. 6 months normal use, with auto shutoff after 90 seconds of non-use.
Dimension: 5.7" x 3.1" x 1.5" (145 x 79 x 38 mm)
Weight: 9 oz. (250 g)
Temperature Limits
Warranty: One (1) year
|
|
|
 |
|
 |
|