You are here: Home > Bearing Tools > Hydraulic Pumps

Hydraulic Pumps


RDI offers a complete selection of SKF Hydraulic Pumps for use with SKF’s wide selection of both English and Metric Hydraulic Nuts. Hydraulic Pumps are available in either Hand Operated or Air (Pneumatic) versions. Care should be used in selecting the pressure range needed for the size of the Hydraulic Nuts you will be using. Pumps are available in sizes ranging from 30 to 400 MPa (4,350 to 58,000 PSI). If in doubt get the next largest size pump!
SKF Hydraulic Pumps
Sort By:
Page of 1
SKF TMJL 50 Hydraulic pump SKF TMJL 50 Hydraulic Pump

50 MPa - (7,250 psi) OK coupling Pump

  • The TMJL 50 pump is mainly intended for use on the low pressure side of SKF OK couplings, but is also suitable for applications where a maximum pressure of 50 MPa (7,250 psi) is required.
  • The pump is supplied with a 3 000 mm (118 in) long high pressure hose with quick connect coupling and mating nipple.

Our Price: $3,757.97
SKF TMJL 100 Hydraulic pump SKF TMJL 100 Hydraulic Pump

Large oil container 100 MPa - (14,500 psi) hydraulic nut pump

  • The TMJL 100 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 92E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14,500 psi) is required.
  • The pump is supplied with 3000 mm (118 in) pressure hose, quick connect coupling and mating nipple, and pressure gauge.

Our Price: $2,707.29
SKF Hydraulic pump 729124 SKF Hydraulic Pump 729124

100 MPa - (14,500 psi)

  • Suitable for hydraulic nuts smaller than or equal to HMV 54E
  • Extra litre of mounting fluid
  • Special pump configurations available
  • Packed in a sturdy protective case

Our Price: $1,660.45
Hydraulic pump 728619 E SKF Hydraulic Pump 728619 E

150 MPa - (21,750 psi)

  • Two stage pressure pumping
  • Extra litre of mounting fluid
  • Packed in a sturdy protective metal case

Our Price: $4,774.57
Sale Price: $4,539.32
You save $235.25!
SKF THAP series - Air-driven hydraulic pumps SKF THAP E Series - Air-Driven Hydraulic Pumps

30, 150 and 300 MPa - (4,350, 21,750 and 43,500 psi

  • Time savings compared to hand operated pumps
  • Mounting and dismounting bearings
  • Dismounting large pressure joints like railway wheels, couplings, flywheels and gear wheels and so on
  • Mounting and dismounting ship propellers, rudder pintles and so on