The Easy therm 60 is a robust powerful 400 Volt stationary microprocessor controlled induction heater, to be used for the professional mounting of heavy parts including bearings, typically used in maintenance shops and production areas. With easy to fit lift installation and rail system for the parts, the Easy therm 60 can be assembled to an ergonomic production machine.
"TURBO-BOOST" In the horizontal position the part will heat Up twice as fast.
Advantage of induction heating:
-
Fast and controllable heating process
-
Safe heating process:
- Only workpiece is heated
- No messing around with dangerous hot oil
- No risk of (local) over heating
-
Suitable for ee or ZZ bearings (no risk of grease leakage)
-
Can be used with bearings with polyamide cages
-
No deforming of the bore of the workpiece
Advantage of TM induction heaters:
-
Maintenance free
-
Three years warranty
-
Fast service
-
User friendly design
-
Modern design
-
Constructed to the latest CE regulations
-
High output
-
Microprocessor controlled heating process
-
Less than 2A/cm rest magnetism
-
Largest range of standard induction heaters
Ergonomic pivoting yoke:
The pivoting yoke has the great advantage that only the workpiece is to be handled because the arm has not to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding on the bearing or workpiece.
Specifications:
| Voltage |
|
380V-600V |
| Frequency |
|
50/60Hz |
| Power |
|
25 kVA |
| Weight heater |
|
350kG |
| Dimensions heater lxbxh |
|
1000x700x 1100 |
| Temp. mode |
|
0-240 (400) °C |
| Time mode |
|
0-99.59 min |
| Induction yokes |
|
30/40/50/60 80/90/100 |
| Max.diam. work piece |
|
1000mm |
| Max. width Work piece |
|
450mm |
| Max.weight Work piece |
|
600kG |
Download Datasheet
