Home > Bearing Tools > Bearing Heaters >

TMI-EasyTherm 15 Bearing Heater with 70mm yokes
handles bearing assemblies up to 150kg with dimensions up to 815x210mm
 
ET15 Bearing Heater with 70mm yokes

Item# Item Name Starts at Sale Price Qty Add
TMI-EASYTHERM-15-heater TMI-EasyTherm 15 Bearing Heater with 70mm yokes
$6,058.00
$ 4,800.00
TMI-Swivel Yoke 20x20x350mm TMI-Swivel Yoke 20x20x350mm
$340.00
TMI-Swivel Yoke 30x30x350mm TMI-Swivel Yoke 30x30x350mm
$342.00
TMI-Swivel Yoke 40x40x350mm TMI-Swivel Yoke 40x40x350mm
$375.00
TMI-Swivel Yoke 50x50x350mm TMI-Swivel Yoke 50x50x350mm
$409.00
TMI-Swivel Yoke 60x60x350mm TMI-Swivel Yoke 60x60x350mm
$376.00
TMI-Swivel Yoke 70x70x350mm TMI-Swivel Yoke 70x70x350mm
$549.00
Check the items you wish to purchase, then click


:
The EASYTHERM 15 is a 12.8 kW induction heater used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. The pivoting side-arm yoke is made to reduce the risk of damage and contamination, while increasing efficiency by ease of use and the "Turbo Boost" feature. This unit can handle bearing assemblies, and other parts, as small as 30mm inner ring to 150 kg with the appropriate configuration. A microprocessor controller allows the user to specify a temperature with accuracy of 2 degrees Celsius or use a timer, perfect to .01 seconds . All this, and a 3 year warranty, makes the EasyTherm 15 Induction Heater, an ideal choice for bearing housing installations.
"TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.


The pivoting yoke has the great advantage that only the work piece is handled, because the arm does not have to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding into the bearing or work piece.
Size induction yokes mm
Minimum Bore
Maximum Outer Diameter
Maximum Width
Maximum Outer Diameter
with adapter yoke 70x70x150
Maximum Width
with adapter yoke 70x70x150
20x20x350
pivoting
30mm
460mm
210mm
760mm
210mm
30x30x350
pivoting
45mm
475mm
210mm
775mm
210mm
40x40x350
pivoting
55mm
485mm
210mm
785mm
210mm
50x50x350
pivoting
70mm
500mm
210mm
800mm
210mm
70x70x350
pivoting

100mm

515mm

210mm

815mm

210mm

60x60x350
pivoting

85mm

515mm

210mm

815mm

210mm

Advantages of TM Easy therm induction heaters:
  • Fast controllable heating process.
  • Safe heating process; only the work piece is heated.
  • Elimination of hot oil bath, no risk of localized overheating.
  • Suitable for sealed and shielded bearings.
  • Suitable for pre-greased bearings.
  • Suitable for bearings with polyamide cages.

Technical advantages of TM Easy therm induction heaters:

  • Manufactured according to the CE Regulations.
  • Fast heating process through high output; Cos phi > 0.8.
  • The heating coil is placed horizontal under the part;
    • By this it is impossible to damage the coil
    • This ensures an equal temperature all over the part (inner- and outer ring).
    • This makes it able to heat up parts with smaller bores.
  • All heaters are continuously useable without any optional cooling system.
  • Constantly monitoring heating process by probe and microprocessor.
  • Temperature control accuracy +/- 2°C.
  • Timer accuracy 0.01 sec.
  • Maintenance free.
  • Three years warranty.
  • Easy to use; user friendly design.
  • Ergonomic design (pivoting yoke principle).
  • Automatic power regulation, no manual pre-setting necessary.
  • Less than 2A/cm residual magnetism.
  • Voltage: 380-480V
  • Frequency: 50/60Hz
  • Power: 12.8kVA
  • Max. Temp.: 240/400°C
  • Weight of heater: 51kG
  • Dimensions of heater (lxbxh): 505x260x240
    • Width U-core: 210mm
    • Height U-core: 215mm
  • Induction yokes(mm): 23/30/40/50/60/70 (individually purchased)
  • Max.diameter of work piece: 560mm
  • Max. width of Work piece: 210mm
  • Max. weight of Work piece: up to 150kg (depending on Yoke)





Browse for more products in the same category as this item:

Bearing Tools > Bearing Heaters