 |
 |
 |
|
PosiTest
Magnetic pull-off thickness gauge for the Non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.
ACCURACY
Highly wear resistant Carbide Probe for longest life and continuous accuracy
Modern and up-to-date gauge Scale Ranges fit all applications
Conforms to national and international standards including ISO and ASTM.
DURABILITY
Extra rugged gauge housing, not affected by mechanical shock, water, acid or solvents
Unique overall gauge design, fully supported, positive positioning, no pivoting tendencies during measurement
Gage can be used fully supported or with only the front probe area contacting the surface
Functions on a permanent rare-earth cobalt magnet, no battery
Explosion Proof - Refinery safe
2 year warrantyEasy To Use
 Positive visual and audible indicators to designate when thickness reading is established
"V" grooves in probe housing and Gauge base allow correct positioning on cylindrical objects
Compact, lightweight, precisely balanced, Independent of gravity - Gauge can be used in any position
GO / NO-GO button can be pre-set for rapid measurement
Probe contact and dial rotation all in a one-finger operation
Gauge is furnished with wrist strap, neck strap and instructions in a high quality leather case with belt loops for your convenience
Features
For Hot dip galvanizing,hard chrom metalizing,paint,enamel,plastic coatings on steel
Scale FM: 0-80mils
Tolerance: +/-0.2 mils up to 4 mils +/-5% of the reading over 4 mils
For Electroplating, thin paint films, phosphating on steel
Scale GM: 0-8 mils
Tolerance: +/-0.04 mils up to 0.8 mils
+/-5% of the reading over 0.8 mils
Scale F: 0-2000 microns
Tolerance: +/-5æm up to 100 microns
+/-5% of the reading over 100 microns
Scale G: 0-200 microns
Tolerance: +/-1æm up to 20 microns
+/-5% of the reading over 20 microns
DOWNLOAD DATASHEET
|
|
|
 |
|
 |
|