 |
 |
 |
|
CMCP793V Features:
- 100 mV/In/Sec ±10%
- 2 Pin MS Connector, Top Exit
- 2 to 8kHz Frequency Response
- 2 Second Settling Time
- -67 to +284° F (-55 to 140° C)
- 1/4" x 28 UNF Mounting Stud
- Class I Division II Approved
The CMCP793V Piezoelectric Velocity Sensor
measurement devices which is used to examine vibration
signals in terms of velocity (in/sec) to amplify the
signal of interest. The CMCP793V inherently decreases high frequency
signals allowing better measurement of low frequency vibration. The
CMCP793V sensor is essentially an accelerometer with an internal
integration
circuit which will produce an output relative to velocity. The
CMCP793V is the ideal
accelerometer for on most types of rotating equipment. The CMCP793V is
lightweight and can be use for magnet or permanent mount applications.
The sensor is designed so that cross wiring will not harm the internal
components and provides protection against ground loops. The CMCP793V is
waterproof and can be hosed down or submersed when using the proper
extension cable such as the CMCP602 series.
The CMCP793V is
stocked in the industry standard 100mV/In/Sec sensitivity, an optional 500mV/In/Sec version is available. See datasheet for additional
details.
Specs:
Sensitivity: 100mV/in/sec ±10%
Frequency Response (±3dB): 2Hz to 6kHz (120 to 260k CPM)
Dyanamic Range: ±40 In/Sec
Power Requirements: 18-30 VDC
Temperature Range: -67 to 284°F (-55 to 140°C)
Case Material: 316L Stainless Steel
Connector: 2 Pin MIL-C-5015
Approvals: CSA/UL Class I Division II Approved, Groups B, C,D
Typical Applications:
Fans,
Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers,
Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine
Tooling, Process Equipment and many more.
 Data Sheet
|
|
|
 |
|
 |
|