![](/v/vspfiles/templates/Accent/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
The CMCP422VT-C Series are loop powered 4-20mA output sensors which are capable of interfacing directly to an analog input card on a PLC or DCS system. The 4-20mA output is proportional to the full scale range in terms of Velocity and are capable of transmitting signals over a long distance without signal loss. The MS connector option allows the sensor to work with a separate cable assembly such as the CMCP602 series cables.
FEATURES:
- Loop Powered
- Velocity Output (ISO 10-1kHz)
- RMS or Peak Detection
- Top Entry, 2 Pin MS Connector
- Class 1 Division 2 Approved
- Class 1 Division 1 with Barrier
- Interfaces Directly to PLC/DCS Systems
- -13 to +194°F (-25 to 90°C) Temperature Range
- 1/4" x 28 UNF Mounting Stud Included
Typical Applications Fans, Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers, Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine Tooling, Process Equipment and many more.
![CMCP422VT-Cc Data Sheet](https://www.stiweb.com/v/vspfiles/assets/images/datasheet.png)
|
|
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif)
|