Digital Humidity and Temperature Meter

• Large LCD Display
• Simultaneous display of Temperature and Relative Humidity
• Max/Min Measurements
• °F or °C Selectable

Easy to Operate and Control

• Max, Min, and Avg Recall
• Select from several Units of Measure
• Ideal for Calculating Air Displacements

Large display of Airflow or Air Velocity

• CFM/CMM Thermo-Anemometer
• Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions (cm2) are stored in the meter?s internal memory for the next power on
• 20 point average for Air Flow 3% velocity accuracy via low friction

Large display of Airflow or Air Velocity with built-in InfraRed Thermometer

• CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measures remote surface temperatures to 536°F (280°C) with 8:1 distance to spot ratio and Laser Pointer
• Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions (cm²) are stored in the meter's internal memory for the next power on
• Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on

Datalogging Dual Display of RH, Temperature, Dew Point and Wet Bulb

• Large LCD displays any two parameters simultaneously Data Hold, Relative, Min/Max
• Programmable power off timer
• Datalogging function stores up to 99 manual readings for display recall or up to 15,000 readings for PC download
• Programmable Start/Stop datalogging time and sample rate of 1 to 86,000 seconds

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39” cable length, hard-wired

Accurately Measures Air Flow (CFM/CMM) or Air Velocity Plus øF/øC Temperature

• Measures air volume in CFM (ft³/min) and CMM(m³/min) plus Temperature simultaneously
• Air Flow displayed in 2 modes as an instantaneous value or up to 20 point average with Record/Recall MIN and MAX readings
• Telescoping probe is ideal for use in ducts and ventilating systems; extends up to 3ft (940mm) long
• Built-in RS-232 PC interface with optional Data Acquisition software and cable

Humidity, Air Temperature Plus IR for Non-Contact Temperature Measurements

• Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display
• InfraRed thermometer has built-in laser pointer and an 8:1 distance to target ratio
• Remote humidity sensor with 39" (1m) coiled cable provides readings for both humidity and ambient temperature
• Auto power off Data Hold and MAX

Waterproof Pocket Size With Air Velocity, Temperature and Windchill

• Display Air Velocity and Temperature or Windchill
• Selectable averaging function of 5, 10, or 13 second intervals
• Fold up protective housing extends to 9" (229mm) for better reach
• Data Hold with Auto power off

Waterproof Pocket Size With Air Velocity, Temperature, %RH, Dew Point and Windchill

• Display air velocity and either Relative Humidity, Dew Point, Temperature or Windchill
• Selectable averaging function of 5, 10, or 13 second intervals
• Fold up protective housing extends to 9" (229mm) for better reach
• Water resistant housing floats

TPI Model 1008 Indoor Air Quality Meter

• Measure and display carbon dioxide (CO2) and temperature.
• The TPI 1008A Indoor Air Quality (IAQ) Meter is a state of the art,easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.
• The 1008A IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature.
• Print via I/R to optional printer (Model A740)