Large display of Airflow or Air Velocity

• CFM/CMM Thermo-Anemometer
• Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions (cm2) are stored in the meter?s internal memory for the next power on
• 20 point average for Air Flow 3% velocity accuracy via low friction

• InfraRed Thermometer measures remote surface temperatures to 932°F (500°C) with 30:1 distance to spot ratio and Laser pointer
• Simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature
• Easy to set Area dimensions are stored in the meters internal memory for the next power on

• 11 selectable units with Max/Min recording and Relative time stamp
• Compensated temperature range 32 to 122°F (0-50°C)
• Data Hold, Auto power off, and Min/Max functions

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39” cable length, hard-wired

Humidity, Air Temperature Plus IR for Non-Contact Temperature Measurements

• Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display
• InfraRed thermometer has built-in laser pointer and an 8:1 distance to target ratio
• Remote humidity sensor with 39" (1m) coiled cable provides readings for both humidity and ambient temperature
• Auto power off Data Hold and MAX

Indoor Air Quality Meter/Datalogger

• Measures CO2 , Temperature, Humidity, Dew Point, and Wet Bulb
• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2 sensor
• Measurement range: CO2: 0 to 6,000ppm Temperature: -4 to 140°F (-20 to 60°C)
• Humidity: 10 to 95%RH
• Continuous (20,000 sets) or Manual (99 sets) datalogging
• Complete with (6) AAA batteries, RS-232 cable, and Windows? 95/98/NT/2000/ME/XP compatible software

Superheat differential measurements: T1-T2, Air-T1, T1-Dewpoint

• Simultaneous display of %RH, Temperature and Dew point or Wet Bulb or External Probe Temperatures
• Built-in RS-232 interface (optional RS-232 cable) - uses Windows® Hyperterminal to download data to a PC
• Memory stores up to 99 data records
• Temperature-K Probes and Calibration Salts are optional (see RH355 kit)

• Built-in InfraRed Thermometer for non-contact temperature measurement to 932øF (500øC) with 30:1 distance to target ratio
• Type K Temperature function for contact temperature measurement to 2501øF (1372øC)
• Highest 2% RH accuracy

TPI Model 1008 Indoor Air Quality Meter

• Measure and display carbon dioxide (CO2) and temperature.
• The TPI 1008A Indoor Air Quality (IAQ) Meter is a state of the art,easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.
• The 1008A IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature.
• Print via I/R to optional printer (Model A740)